Philips CertaDrive LED Driver – Round, 14W, 350mA, 30–40V DC, 230V
Brand: Philips
The Philips CertaDrive R LED Driver is a compact, fixed-output constant-current driver designed to provide reliable power for COB and mid-power LED modules. Delivering a constant output current of 350mA with an operating voltage range of 30–40V DC, it supports LED loads from 10.5W to 14W. Its compact round housing makes it suitable for built-in installation in indoor lighting fixtures, including professional applications in retail, offices, and public buildings. It features automatic recovery protection against open-load, short-circuit, and overload conditions.
Specifications:
- Brand: Philips
- Product Series: CertaDrive R
- Model: CertaDrive R 14W 0.35A 40V LPF 230V
- Order Code (12NC): 9290 034 20080
- Driver Type: Constant-current LED driver
- Rated Output Power: 14W
- Output Power Range: 10.5–14W
- Output Current: 350mA, fixed
- Output Voltage: 30–40V DC
- Maximum Output Voltage: 60V RMS
- Output Current Tolerance: ±10%
- Input Voltage: 220–240V AC (operating range: 198–264V AC)
- Input Frequency: 50–60Hz (operating range: 47.5–63Hz)
- Rated Input Current: 0.16A
- Rated Input Power: 16.3W
- Power Factor: 0.5
- Efficiency: 84%
- Output Current Ripple: ≤3% low-frequency, ≤15% high-frequency
- Dimmable: No
- Control Method: Fixed output
- Isolation: SELV input-to-output
- Protection: Open-load, short-circuit, and over-power protection with automatic recovery
- Driver Lifetime: 30,000 hours at Tc-life; up to 50,000 hours at Tc-life minus 10°C
- Mounting: Built-in installation
- Housing: Compact round housing
- Dimensions: Ø47 × 23 mm
- Mounting Hole Distance: 43.1 mm
- Mounting Hole Diameter: 3.1 mm
- Weight: 53g
- Protection Rating: IP20
- Operating Temperature: −20°C to +60°C
- Maximum Case Temperature (Tc): 85°C
- Certifications: CB, CCC, CE, ENEC, RCM, TISI
- Applications: COB and mid-power LED modules, public buildings, retail lighting, office lighting, indoor point lighting
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.